Post-Tensioned Slab Concrete Repair & CFRP Strengthening at Heathrow MSCP3 | Structural Repair Solutions

Concrete Reinstatement | Crack Injection | Galvanic Corrosion Mitigation | Structural Reinstatement

The Challenge

Multi-Storey Car Park 3 (MSCP3) at Heathrow Airport is a high-turnover, landside post-tensioned reinforced concrete structure subjected to continuous vehicle loading and de-icing salt exposure. Condition assessments identified localised cracking, soffit delamination and incipient reinforcement corrosion caused by water ingress and breakdown of the existing deck waterproofing membrane.

Executing structural rehabilitation within an active airport short-stay car park demanded rigorous technical and operational controls:

  • Post-Tensioned Slab Sensitivity: Concrete breakout had to be strictly controlled—both in depth and plan area—to avoid damaging post-tensioning tendons, anchorages or passive reinforcement while maintaining structural load paths.
  • Live Public & Traffic Interface: Works had to proceed over a two-to-three-week daytime programme (08:00–17:00) inside an operational car park, requiring segregated exclusion zones, safe pedestrian/vehicle diversions and strict dust and debris containment.
  • Multi-Discipline Structural & Durability Integration: Restoration required seamless sequencing across soffit concrete reinstatement, embedded galvanic corrosion control, structural Carbon Fibre Reinforced Polymer (CFRP) strengthening and traffic-grade deck waterproofing.
Client / Principal
Contractor
M Group Ltd (Heathrow Landside Maintenance)
Site LocationMSCP3 Short Stay Car Park, Stanwell Road, Heathrow Airport
(TW14 8NG)
Asset Type Hospitality
Commercial Leisure
Structure TypeOperational Multi-Storey Post-Tensioned Reinforced Concrete Car Park
Scope of WorksNDT verification, concrete breakout & reinstatement, galvanic anodes, epoxy crack injection, CFRP strengthening and deck waterproofing
Contract ReferenceSRS-MGL-787

The Solution

Structural Repair Solutions planned and delivered a comprehensive, four-phase structural repair, strengthening and waterproofing sequence under full CDM 2015 governance and Point of Work Risk Assessments (POWRA).

1. Pre-Breakout Testing, Segregation & Temporary Propping

  • Diagnostic Mapping: Operatives conducted acoustic tap testing alongside cover meter / rebar location scanning, surface moisture checks and dew-point monitoring to establish exact delamination boundaries and ensure safe breakout clearances.
  • Live Environment Controls: Segregated exclusion zones, heavy-duty polythene containment and signposted traffic/pedestrian diversions isolated work areas accessed via IPAF-certified scissor lifts (MEWPs) and aluminium scaffold towers. Where breakout depths exceeded 70 mm over spans greater than 800 mm, adjustable steel props were installed prior to concrete removal.

2. Concrete Reinstatement & Galvanic Corrosion Mitigation

  • Substrate & Steel Preparation: Repair perimeters were saw-cut and defective concrete was broken out to a sound substrate. Exposed reinforcement bars and post-tensioning strands were mechanically cleaned and primed with SikaTop Armatec-110 EpoCem anti-corrosion bonding bridge.
  • Anode & Inhibitor Protection: Embedded Galvashield N galvanic anodes were crimped directly onto the reinforcement steel to prevent incipient anode formation, supported by Sika FerroGard-903+ migrating corrosion inhibitor.
  • Structural Reinstatement & Crack Injection: Active cracks were sealed via low-pressure Sikadur-52 epoxy injection, voids were reinstated flush using high-build Sika MonoTop-4052 mortar, and soffits were coated with Sikagard-550W Elastic anti-carbonation protection.

3. CFRP Structural Strengthening (Repair Areas 1 & 2)

Within designated structural strengthening zones (Repair Areas 1 and 2), concrete soffits were grit-blasted with industrial vacuum extraction, degreased with Sika Cleaner P and verified for flatness and pull-off bond strength. Precision grooves were cut to embed Sika CarboDur BC10 carbon-fibre rods alongside externally bonded Sika CarboDur S1012 pultruded plates fixed with Sikadur-30 structural epoxy adhesive.

4. Fast-Curing Waterproofing Reinstatement

To prevent future chloride and water ingress on trafficked deck surfaces, operatives applied a rapid-curing PMMA waterproofing system comprising Sikafloor-10 Pronto N primer, fleece-reinforced Sikafloor-32 Pronto base membrane, broadcast kiln-dried silica sand (0.6–1.2 mm) for skid resistance, and a durable Sikafloor-18 Pronto wearing coat overlapped seamlessly into the existing deck membrane.

Post-Tensioned Slab Concrete Repair & CFRP Strengthening at Heathrow MSCP3 | Structural Repair Solutions

Key Outcomes & Operational Value

  • Extended Structural Service Life: Combining high-strength concrete reinstatement, embedded galvanic anodes and CFRP plates/rods restored structural capacity and halted chloride-induced reinforcement corrosion without disruptive structural replacement.
  • Zero Disruption to Airport Parking Operations: Phased exclusion zones, dust extraction and fast-curing Sikafloor Pronto resins enabled safe daytime delivery across a live Heathrow Short Stay Car Park.
  • Full Quality Assurance & Traceability: Pre-installation rebar scanning, environmental dew-point logging and pull-off bond testing verified full compliance with the engineer’s specification.

Call Us
Email Us
Enquire Now
Post-Tensioned Slab Concrete Repair & CFRP Strengthening at Heathrow MSCP3 | Structural Repair Solutions