If you have a commercial, industrial, infrastructure or heritage structural repair enquiry, contact us now. We will respond within one working day. Please note we do not provide services for domestic properties.
Business enquiries:
Cleaning a commercial facade or a historic masonry building is not a janitorial task; it is a delicate material science operation. When property managers or unqualified contractors deploy standard high-pressure industrial power washers to remove dirt, paint, or carbon soiling from brick and stone, they cause immediate, irreversible structural damage.
Traditional bricks and natural stones rely on their outer surface to protect them from the elements. During the original manufacturing process, a brick develops a hardened “fired skin” that acts as a weather-resistant shield.
When blasted with cold, high-pressure water, this protective skin is violently stripped away. The exposed, porous interior of the brick is left completely defenseless. It immediately begins acting like a sponge, absorbing massive amounts of rainwater. When temperatures drop, this trapped water freezes, expands, and physically shatters the face of the brick – a structural failure known as spalling.
Furthermore, blasting historic stone with abrasive chemicals or aggressive grit forces soluble salts deep into the substrate, guaranteeing rapid, efflorescent decay. To safely remove decades of biological growth, carbon pollutants, or applied coatings, you must clean the asset without breaching its physical integrity.
Structural Repairs treats facade cleaning as an engineered surface restoration. We do not use destructive industrial jet washes. We deploy advanced, conservation-approved cleaning technologies designed specifically to preserve the structural and aesthetic integrity of delicate masonry.
Whether we are removing heavy carbon sulphation from a city-centre commercial block or gently peeling biological matter off a Grade I listed building, our methodology is dictated by the exact pathology and porosity of the host material. As an integrated structural engineering contractor, we ensure our cleaning operations actively complement the structural stability and preservation of the asset.
Standard pressure washers operate at thousands of PSI (pounds per square inch). This extreme force strips the protective fired face off the brick and blows the mortar out of the joints. Once the face is gone, the brick will absorb water, freeze during winter, and physically break apart (spall), leading to severe structural degradation.
The DOFF system uses superheated steam (up to 150°C) delivered at very low nozzle pressure. Because it uses heat rather than kinetic force to break down dirt, paint, and biological matter, it does not abrade the surface of the brick or stone. Furthermore, the high temperature instantly kills biological spores, meaning the surface stays cleaner for much longer without the need for toxic biocides.
Sandblasting is highly aggressive, using hard grit and high pressure to strip surfaces, which severely pits and destroys soft masonry. The TORC system is the engineered evolution of safe cleaning. It uses very low air pressure, a specialised swirling vortex nozzle, and a micro-granulate that is physically softer than the host stone. It gently “rubs” the dirt off rather than blasting the wall away.
Yes. Modern, impermeable masonry paints trap moisture inside old solid walls, causing damp issues inside the building and structural decay outside. We utilise the DOFF steam system, often in conjunction with specialised, breathable paint softeners, to gently peel the impermeable plastic coatings off the brickwork without damaging the historic substrate beneath.
